When you sit down to prepare a DOT Management Information System (MIS) report, start with the form and the records that support each entry, not a year-end guess about how many tests your company completed. The DOT Drug and Alcohol Testing MIS Data Collection Form, also called Form DOT F 1385, organizes the information into employer details, covered employees, drug testing data, and alcohol testing data. This walkthrough explains how to work through those sections for an FMCSA-regulated motor carrier.
Prepare and maintain the report annually, even if FMCSA has not asked you to submit it. Motor carriers generally submit their report when FMCSA requests it, following the agency’s instructions and deadline. Keep the completed report and required supporting records for five years, as described in 49 CFR § 382.403.
Before You Open the Form: Assemble Your Source Records
Set aside the reporting year’s driver roster, random-pool selection records, test and result reports, and any records of changes to driver status. Your C/TPA can help assemble program reports, and collection-site documentation or electronic chain-of-custody forms (eCCFs) can help verify collection details. Use MRO reports to confirm the final verified drug test outcomes rather than relying on a collection record alone.
Check alcohol results against the records completed by the Breath Alcohol Technician (BAT), and review Clearinghouse information as a cross-check for relevant violations or return-to-duty activity. The Clearinghouse is not a substitute for your test records, nor should you use it as the sole source for all MIS test totals. You are building a report for your company and the calendar year, not copying a consortium-wide total or counting every record in your files.
Quick Tip: Create a reconciliation worksheet with one row per testing category and separate columns for drug tests, alcohol tests, results, refusals, and cancellations. Add a source-record reference beside each total so you can trace it back during review. This is a convenient way to resolve discrepancies before you transfer numbers to the official form.
Section I: Identify the Employer and the FMCSA Operation
Section I asks for the employer’s identifying and contact information, the certifying official, and, if applicable, the person who prepared the form and the C/TPA. Enter your company’s legal name and any applicable “doing business as” name, current address, email, and telephone information. For the FMCSA reporting line, provide the company’s USDOT number and answer the form’s owner-operator and exemption questions accurately.
The company official who certifies the report should review the completed entries and sign and date the form. A C/TPA may organize data or prepare the report, but the carrier should not assume that using a service provider transfers the employer’s responsibility for accurate reporting. Confirm the form’s current instructions and the correct reporting year using the FMCSA MIS information page and the official DOT form and instructions.
Common Section I mistakes include:
Entering an outdated company address or the wrong USDOT number.
Leaving the C/TPA or preparer information blank when applicable.
Treating the C/TPA as the certifying employer official.
Checking a reporting option without confirming whether it applies to the carrier.
Section II: Reconcile Covered Driver Positions
For an FMCSA motor carrier, the covered employee category is drivers performing DOT-regulated safety-sensitive functions. The form asks for the total number of safety-sensitive employees and employee categories, then provides a category table. Follow the current form instructions; for a carrier reporting only to FMCSA, use the applicable driver category rather than adding non-covered office or shop employees.
The number used for random testing is based on the average number of driver positions subject to random testing, not just the number of drivers employed on the last day of the year. Use the driver count for each random selection period, add those counts, and divide by the number of periods. If your pool is selected quarterly, for example, add the four quarterly counts and divide by four; with monthly selections, use all 12 counts and divide by 12.

Compare each pool snapshot with your active-driver roster for that selection date. Investigate drivers who appear on the roster but not in the pool, people who remained in the pool after becoming inactive, and drivers added or removed during the year. Do not simply average year-end headcounts or count each unique driver once if the form’s instructions call for counts by selection period.
Section III: Enter Drug Testing Data by Test Reason
Section III separates drug testing into rows for pre-employment, random, post-accident, reasonable suspicion/cause, return-to-duty, and follow-up testing. Pull the category totals from test orders and results, then verify them against collection documentation, eCCFs, MRO outcomes, and your C/TPA’s records. Include the reportable activity for covered applicants as directed by the form instructions, even if an applicant was not ultimately hired.
The columns distinguish total test results, verified negatives, verified positives, specific drug types, other positive results, refusals, and cancellations. When completing the totals, follow the form’s instructions carefully: drug positives by substance are detail within the positive-result reporting, not extra tests to add again to the total. Cancelled results are reported separately and should not be counted as completed test results in the total column.
Common Section III misfilings include:
Counting a cancelled test as a completed result or counting it twice.
Classifying a pre-employment test as random because the driver later joined the pool.
Recording an initial laboratory finding as a verified positive without confirming the MRO’s final result.
Putting a refusal in the wrong refusal column or leaving a refusal out of the report.
Counting a scheduled test that was never completed.
Section IV: Check Alcohol Screening and Confirmation Results
Section IV uses similar testing-reason rows, but its columns report alcohol screening results, confirmation testing, refusals, and cancellations. Use BAT records and supporting alcohol testing forms to verify screening outcomes and any required confirmation test. Report the screening and confirmation information in their designated columns rather than treating them as interchangeable events.
A screening result and a confirmation test are not automatically two separate screening results. Check the form instructions for how to report screenings below 0.02, screenings of 0.02 or greater, confirmation results, refusals, and cancelled tests. Pay particular attention to refusal records, including “shy lung” situations, and use the applicable documentation to determine how they should be classified.

One common error is adding a confirmation test to the screening-test total as if it were another screening. Another is treating a cancelled alcohol test as a completed result. Before finalizing Section IV, compare the report against the BAT documentation and your C/TPA’s year-end test summary, and investigate any difference instead of forcing the totals to match.
Cross-Check Random Testing Before You Certify
The annual minimum random testing rates for FMCSA-regulated drivers are 50% for controlled substances (drug) testing and 10% for alcohol testing, based on the average number of driver positions subject to random testing. Review the current FMCSA random testing requirements and the applicable reporting-year instructions. These percentages are annual minimums, not a requirement to test the same fixed set of individual drivers.
To check your figures, multiply the average driver-position count by the applicable rate, then compare the resulting annual minimum with completed random tests in your records. Review selection and completion dates, since a selection is not the same as a completed test. Resolve any unexplained shortfall or mismatch before certifying; do not count pre-employment or other non-random tests toward the random total.
Submission-Readiness Review: Check the Form Against the Files
Before you send a report in response to an FMCSA request, or file it securely for your records, confirm the reporting year and the employer information first. Then check that your driver-position calculation matches the random-pool records and that each test is assigned to the correct category. Verify that result totals, refusals, and cancellations are supported by the source records and follow the form instructions.
Use this final review:
The form identifies the correct employer, USDOT number, and calendar year.
The covered-driver count and average driver-position calculation are documented.
Each test is listed under the correct reason and reporting category.
Drug results agree with MRO records; alcohol results agree with BAT records.
Refusals and cancellations are classified and reported correctly.
The certifying official has reviewed, signed, and dated the report.
The report and supporting records are stored securely and retained for five years.
If FMCSA requested submission, the report is sent by the deadline and through the process provided by the agency.
The report should be traceable: someone reviewing it should be able to follow a number from the form back to the underlying records. If an entry cannot be supported, pause and resolve the gap rather than estimating from memory. Labworks USA’s DOT compliance checklist can also help you organize the records and responsibilities that support an audit-ready program.
In Conclusion
The MIS form is easier to complete when you treat each section as a reconciliation task: identify the employer, establish the covered-driver denominator, categorize testing activity, and verify results against the records that produced them. Preparing and maintaining the report annually gives you time to correct inconsistencies before a request arrives. Keep current with FMCSA instructions, preserve the report and supporting documentation for five years, and submit when FMCSA requests it.
Labworks USA can support your file management and MIS compliance reporting process, helping you organize driver records, testing information, and annual reporting materials. Visit Labworks USA to learn how our compliance services can help you keep documentation in order and focus on running your operation.